Auto Parts Car Engine Air/Oil/Cabin/Fuel Filter for Filters Series

• Customization: Available
• After-sales Service: Online
• Warranty: 10000km
• Type: Air Filter, Oil Filter, Fuel Filter, Cabin Filter
• Material: Paper Core
• Structure: Panel Filter
• Filtration Grade: Hepa Filter
• Application: Oil
• Pattern: Dry
• Classification: Oil Filter
• Transport Package: Boxed
• Specification: customized
• Origin: Hebei, China
• HS Code: 8421230000
• Production Capacity: 1000000pieces/Year

Product Description

 

We can almost provide filter solutions for all light & heavy duty vehicles, no matter it is a small car, commercial vehicle, agriculture vehicle or engineering vehicle. At PLM, our filter combinations can satisfy all harsh requirements of vehicle manufactures, no matter they require a reliable air filter, a high performance oil filter, a durable fuel filter or a protective cabin filter. It is recommended to replace your filter elements regularly to ensure they can always run in perfect conditions.

Recommendations On 
Filter Element Replacement Cycle


If you fail to replace your filters regularly, filter may be clogged and lead to
1.Reduced engine power and increased pollution emissions.
2.Higher fuel consumption.
3.Increased debris particles, causing wear and tear on the engine
4.Failures when starts the engine.



Oil Filters

Oil filter is used to remove impurities such as dust, metal particles, carbon deposits and soot particles from engine oil and deliver clean oil to each lubrication part to protect the engine.


Oil filters are divided into: eco-friendly oil filters, metal oil filters and spin-on oil filters.

BENEFITS
Remove contaminants from the engine oil and ensure a better fluid cleanliness.
Ensure a lasting constant engine power to avoid increased oil consumption.
Protect the engine from premature wear and extend the service life of the engine.
Reduce the maintenance frequencies and costs.
 

Structure of Eco-Friendly Oil Filters


Eco-friendly oil filter generally consists of a top cap, a bottom 
cap, a layer of filter media and an inner support tube. When 
replacing the oil filter, only the filter element needs to be 
replaced.

1. End caps: It consists of a top cap and a bottom cap. Generally, plastic end caps, non-woven fabric end caps and a 
combination of plastic and non-woven fabric end caps are 
provided.

2. Filter media: Pleated filter paper is used to remove impurities from the oil.

3. Optional parts: The plastic inner tube serves as the inner 
  support tube. Some eco-friendly oil filters are provided with 
  an inner tube in the center. While the others are not provided with an inner tube in the center, instead, the inner tube is integrated with end cap.

Metal Oil Filters


Metal oil filter generally consists of a top cap, a bottom cap, a 
layer of filter media, an inner support tube and an optional outer support tube. When replacing the metal oil filter, only the filter element needs to be replaced.

1. Metal end caps: It consists of a top cap and a end cap to 
 connect the filter element together.

2. Filter media: Pleated filter paper is used to filter out impurities in the engine oil.

3. Inner support tube: perforated metal tube is generally 
 selected as the inner support tube of the filter element.

4. Optional outer support tube: Used to support and protect the filter element, it is generally made of perforated metal mesh. In addition, expanded metal mesh is also a good choice for outer support tube.

Structure of Spin-On Oil Filters


Spin-on oil filter consists of a metal shell, a spring, a bypass valve, a filter element, an anti-drainback valve, a cover plate and a seal ring. When replacing the spin-on oil filter, the oil filter needs to be replaced as a whole.

1.Metal shell: A container used for spin-on oil filters to accommodate the filter element and maintain pressure operation

2. Spring: Used to hold the filter element in place and secure it onto the metal shell to allow it can compress and rebound under extreme pressure.

3. Bypass valve (pressure relief valve): Installed on the filter element, it will automatically open to allow the oil flowing through when the filter element is clogged and the oil pressure reaches 100 kPa ± 20 kPa.

4. Metal end caps: It consists of a top cap and a end cap to connect the filter element together.

5. Spiral perforated support tube: The center tube that supports the filter media and prevents it from collapsing, it allows the oil to flow through the filter media freely. Without the inner tube, the filter media cannot withstand the engine cold start and the increased differential pressure.

6. Filter media: Cured pleated filter paper is used to add strength to the filter media. Curing occurs when the filter media is in a flat, pleated state to ensure consistent and even curing, thereby offering a high efficient oil impurities filtration.

7. Anti-drainback valve: When the car stalled, it can prevent oil from flowing back. When the engine starts cold, it ensures that the oil pressure can be formed in the lubrication system as soon as possible to ensure oil supply and shorten the period of engine dry grinding.

8. Shell threaded cover plate: Used to seal the filter element into the shell, prevent the gasket sealing surface from deflecting (moving) and provide a strong threaded connection to the engine.

9. Rubber seal ring: Made of silicone, it ensures a tight connection between the oil filter and the engine block to resist changing pressure and mechanical loads, and no leakage occurs even at extreme temperatures.

TECHNICAL DAT
1. Filtration efficiency: 100% filtration for particles 30 um and above; 70% filtration for particles 3 um below.
2. Compression strength: up to 600 kPa.
3. High temperature resistance: >300 °C.
4. Average pore size of fuel filter paper: 7-45 μm.
5. Fuel filter paper thickness: 0.36-0.9
 


PACKAGE & SHIPPING 

Packaging steps: 
Each piece put in on carton box, wood case, Plastics Packaging, pallet, etc.
Mode of shipping: 
Shipping by air, sea or car.
By sea for batch goods;
Customs specifying freight forwarders or negotiable shipping methods.



Customize services
We can produce many kinds of filter products,if you have your own design or have specificationdrawing,we can make products as your requirement.
If you don't have any idea, please tell us where will it be using, we will give you some specification to refer,and we can provide the drawing also.

FAQ 

Q1. How can we quote for you?
Please  send  us enquiry  by email, with all  the  technical  drawings  you  have. Such  as  material  grade,  tolerance,  machining  demands,  surface  treatment, heat treatment, mechanical property requirements, etc. Our specialized engineer will check and quote for you, we would appreciate the opportunity and will respond in 3-5 working days or less. 
Q2. How can I get a sample to check your quality?
After price confirmed, you can requiry for samples to check quality.
If you need the samples, we will charge for the sample cost.
But the sample cost can be refundable when your quantity of first order is above the MOQ.
Q3. Can you do OEM for us?
Yes, the product packing can be designed as you want.
Please feel  free to contact us if you have any question.