| Customization: | Available |
|---|---|
| Certification: | ISO, ISO, GS |
| Color: | Customized |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Electric Linkage Telescopic Mast
The Linkage Telescopic Mast is driven by trapezoidal screw, which makes the lifting and lowering process smooth and reliable, and has the function of self-locking at any position.
The Linkage Telescopic Mast adopts square or round cross-section pole, with good guiding, good bending and torsion resistance of the mast.
Each section of the rod realizes linkage structure, short lifting and lowering time, can be operated by electric power, manual operation, and convenient hand cranking.
There is a precision positioning mechanism when lifting and lowering. Eliminate the gap of the rod body, which can ensure that the swing and torsion of the rod body in place can be minimized.
Sealant sealing is used between each jointed rod, and the lift rod has good waterproof, sandproof and iceproof performance. Each section of the pole is protected by a coating layer inside and outside, and the outer surface is protected by a paint layer, so it has good three-proof performance for long-term work in the field.
The lifting pole is equipped with wire frame, hand crank and other accessories, and the position of the hand crank can be determined according to the user's first use.
The position of the hand crank can be customized according to the user's first use, and the mounting size of the upper and lower end flanges can be customized according to the user's requirements.
Electric Step-By-Step Mast
The electric step-by-step mast is a high-precision electric lifting mast independently developed by our factory. It is realized by the screw and connecting sleeve on the locking mechanism to lift the mast section by section sequentially, and at any height with self-locking function. Through the control system and the inductor control of the number of turns of the motor to achieve high-precision control of the lifting height of the lifting bar, abandoning the pneumatic lifting mast and wire rope-pulled lifting mast on the lifting height of the control of the inaccurate, large error shortcomings. In order to get better directional stability, the factory chooses four-bar guiding cylinder. In the absence of electricity, the lift can be realized by manual operation.
This series of products are made of high-strength aluminum alloy tubes, the surface of which is hard anodized, so that the tubes get high hardness, wear resistance and corrosion resistance, making the surface more beautiful.
Electric / manual step-by-step lifting --
| Type | Closing height (mm) |
Unfolding height (mm) |
Section number |
Lifting speed (m/min) |
Pipe OD - Max (mm) |
Pipe ID - Min (mm) |
Body weight (kg) |
Vertical load (KG) |
Motor power (W) |
Operating Voltage |
Operation Mode |
| SD10ZL11 | 1700 | 10000 | 11 | / | 229 | 60 | / | 100 | 500 | customized | Electric / manual |
| SD10ZL8 | 2000 | 10000 | 8 | 3.2 | 170 | 60 | 110 | 100 | 500 | customized | Electric / manual |
| SD12ZL11 | 2000 | 12000 | 11 | / | 229 | 60 | / | 100 | 700 | customized | Electric / manual |
| SD15ZL9 | 2600 | 15000 | 9 | / | 184 | 60 | / | 80 | 700 | customized | Electric / manual |
| SD18ZL11 | 2450 | 18000 | 11 | / | 229 | 60 | / | 80 | 750 | customized | Electric / manual |
| SD20ZL10 | 3000 | 20000 | 10 | / | 202 | 60 | / | 50 | 150 | customized | Electric / manual |
| SD20ZL11 | 2870 | 20000 | 11 | 1.96 | 229 | 60 | 260 | 50 | 750 | customized | Electric / manual |
| SD30ZL11 | 3900 | 30000 | 11 | / | 229 | 60 | 260 | 50 | 750 | customized | Electric / manual |
Electric / manual wire rope --
| Type | Closing height (mm) |
Unfolding height (mm) |
Section number |
Lifting speed (m/min) |
Pipe OD - Max (mm) |
Pipe ID - Min (mm) |
Body weight (kg) |
Vertical load (KG) |
Motor power (W) |
Operating Voltage |
Operation Mode |
| SD4LL3 | 1700 | 4000 | 3 | ≈ 3 | square 106 | square 64 | 38 | 70 | 180 | customized | Electric / manual |
| SD4LL4 | 1400 | 4000 | 4 | ≈ 3 | square 124 | square 64 | / | 60 | 200 | customized | Electric / manual |
| SD4LL6 | 1200 | 4000 | 6 | ≈ 3.1 | square 170 | square 64 | / | 40 | 400 | customized | Electric / manual |
| SD5LL5 | 1520 | 5000 | 5 | ≈ 3.7 | square 147 | square 64 | 78 | 50 | 250 | customized | Electric / manual |
| SD6LL4 | 2000 | 6000 | 4 | ≈ 3 | square 124 | square 64 | / | 60 | 200 | customized | Electric / manual |
| SD6LL5 | 1750 | 6000 | 5 | ≈ 3.7 | square 147 | square 64 | 85 | 50 | 250 | customized | Electric / manual |
| SD6LL6 | 1600 | 6000 | 6 | ≈ 3.1 | square 170 | square 64 | 106 | 40 | 400 | customized | Electric / manual |
| SD6LL7 | 1500 | 6000 | 7 | ≈ 3 | square 192 | square 64 | / | 25 | 750 | customized | Electric / manual |
| SD7LL5 | 1900 | 7000 | 5 | ≈ 3.7 | square 147 | square 64 | / | 50 | 250 | customized | Electric / manual |
| SD7LL7 | 1600 | 7000 | 7 | ≈ 3 | square 192 | square 64 | / | 25 | 750 | customized | Electric / manual |
| SD8LL5 | 2150 | 8000 | 5 | ≈ 3.7 | square 147 | square 64 | 100 | 50 | 250 | customized | Electric / manual |
| SD8LL6 | 2000 | 8000 | 6 | ≈ 3.1 | square 170 | square 64 | / | 40 | 400 | customized | Electric / manual |
| SD8LL7 | 1820 | 8000 | 7 | ≈ 3 | square 192 | square 64 | / | 25 | 750 | customized | Electric / manual |
| SD9LL9 | 2000 | 9000 | 7 | ≈ 3 | square 192 | square 64 | / | 25 | 750 | customized | Electric / manual |
| SD10LL5 | 2550 | 10000 | 5 | ≈ 3.7 | square 147 | square 64 | / | 50 | 250 | customized | Electric / manual |
| SD10LL6 | 2400 | 10000 | 6 | ≈ 3.1 | square 170 | square 64 | 118 | 40 | 400 | customized | Electric / manual |
| SD10LL7 | 2200 | 10000 | 7 | ≈ 3 | square 192 | square 64 | / | 25 | 750 | customized | Electric / manual |
| SD12LL6 | 2800 | 12000 | 6 | ≈ 3.1 | square 170 | square 64 | / | 40 | 400 | customized | Electric / manual |
| SD12LL7 | 2500 | 12000 | 7 | ≈ 3 | square 192 | square 64 | / | 25 | 750 | customized | Electric / manual |
| SD15LL7 | 3050 | 15000 | 7 | ≈ 3 | square 192 | square 64 | / | 25 | 750 | customized | Electric / manual |
Since 2000, we have been maintaining certification, standardizing the company's business activities in accordance with the requirements of quality management system standards, and taking increasing customer satisfaction as our business purpose.
Packaging steps:
Each piece put in on carton box, wood case, Plastics Packaging, pallet, etc.
Mode of shipping:
Shipping by air, sea or car.
By sea for batch goods;
Customs specifying freight forwarders or negotiable shipping methods.
1. Could make product for customer according to customer samples or drawings.
2. Can deal with various drawings soft wares: PRO/E, Auto CAD, Slid Work, UG, etc.
3. Could offer samples for free if the sample is simple and low value.
4. Submit samples with official inspection reports including material report,mechanical property report and dimensional report.
5. Can provide the third party inspection report.
6. Could provide at least one year quality guarantee after customer receives the products.
7. We could supply storage service for customer if required.
Q1. How can we quote for you?
Please send us enquiry by email, with all the technical drawings you have. Such as material grade, tolerance, machining demands, surface treatment, heat treatment, mechanical property requirements, etc. Our specialized engineer will check and quote for you, we would appreciate the opportunity and will respond in 3-5 working days or less.
Q2. How can I get a sample to check your quality?
After price confirmed, you can requiry for samples to check quality.
If you need the samples, we will charge for the sample cost.
But the sample cost can be refundable when your quantity of first order is above the MOQ.
Q3. Can you do OEM for us?
Yes, the product packing can be designed as you want.
Please feel free to contact us if you have any question.
){kind=link}